Esun PLA+ нить 1,75 мм, нить для 3D-принтера PLA Plus, катушка 1 кг (2,2 фунта), серебро | 40403450 - Купить онлайн по лучшей цене. Быстрая доставка в Россию, Москву, Санкт-Петербург
+971 4 262 3337
Переключить на Темный режим

Esun PLA+ нить 1,75 мм, нить для 3D-принтера PLA Plus, катушка 1 кг (2,2 фунта), серебро | 40403450

Модель: 40403450
Артикул: 117016
Color: Silver
Silver
   
Сообщите о неверной или неуместной информации о продукте.

Сообщите о неверной или неуместной информации о продукте.



Описание для Esun PLA+ нить 1,75 мм, нить для 3D-принтера PLA Plus, катушка 1 кг (2,2 фунта), серебро | 40403450

Description :

PLA+ is a PLA-based 3D printing filament with enhanced physical properties. The increased strength and toughness makes it an excellent choice for a variety of printing applications.

  • Plant-based material

PLA+ is made from starch from raw materials obtained from renewable plant resources.

  • Better toughness

Compared to regular PLA, eSUN PLA+ has better physical properties. The increased toughness makes it less susceptible to breakage.

  • High printer compatibility

eSUN PLA+ is compatible with most FDM 3D printers.

  • Vacuum sealed packaging

The vacuum-sealed packaging protects your filament from dust, dirt and moisture.


 

Printing of eSUN PLA+

The printing temperature of PLA+ is about 20 degrees Celsius higher than regular PLA. The recommended printing temperature is around 210 - 230 °C.

A heated bed is not required. However, if there is a heated bed, this can be heated to 45 - 60 °C.

How to store your filament

1. If you will not use your printer for more than a few days, please remove the filament from the nozzle to protect it.

2. In order to extend the lifespan of your filament, please put the filament back into the original vacuum bag and store it in a cool and dry place after printing. If you have a filament box, store your filaments there.

3. When storing your filament, please pass the loose end of the filament thread through the holes on the edge of the filament spool to avoid tangles. This way it will unspool properly the next time you use it.

Читать далее

Спецификации для Esun PLA+ нить 1,75 мм, нить для 3D-принтера PLA Plus, катушка 1 кг (2,2 фунта), серебро | 40403450

Общие
Бренд
Модель
  • 40403450
Артикул Microless
  • 117016
Дата первой доступности
  • 11 марта, 2023
Диаметр
  • 1.75 mm
Материал
  • Poly
Цвет
  • Silver


Отзывы для Esun PLA+ нить 1,75 мм, нить для 3D-принтера PLA Plus, катушка 1 кг (2,2 фунта), серебро | 40403450

0
Отзывов пока нет
Будьте первым, кто оставит отзыв об этом товаре

Спасибо за оценку!
Напишите полный отзыв.
Выберите изображения